Connect with us

DPDT On-Off-On for options

Discussion in 'General Electronics Discussion' started by lostintranslation, Nov 6, 2013.

Scroll to continue with content
  1. lostintranslation


    Nov 6, 2013
    please help newb, trying to wire in part of a circuit option to let me switch from 1000 CAPS, adding additional 1000 CAPS that are wired in parallel using a DPDT toggle, but, not quite sure how to wire it. I can read the circuit, but applying it to the poles on the switch for the circuit are a little tough for me to figure out right now. I'm learning. Thanks in advance for any help, it is appreciated.

    Attached Files:

    Last edited: Nov 6, 2013
  2. davenn

    davenn Moderator

    Sep 5, 2009
    hi there
    welcome to the forums :)

    OK to give you a hint...

    the 2 centre positions B and E will be connected together and will go to that top positive rail shown in your circuit

    see if you can work it out from there


    CDRIVE Hauling 10' pipe on a Trek Shift3

    May 8, 2012
    Perhaps this pictorial will help..


    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day