Connect with us

DIY Solder mask?

Discussion in 'Electronic Basics' started by Glenn Ashmore, Feb 16, 2005.

Scroll to continue with content
  1. In the past I have sent files off to the PCBShop to get boards made up but
    that takes a couple of weeks and occasionally I don't find a routing error
    until I have it back. I also have everything I need to make photo positive
    resist boards. Drilling holes is a real PITA so I experimenting with
    surface mount components so I only have to drill vias. I have got it
    working pretty well with a converted toaster oven except for one thing. I
    have found that a solder mask is almost essential to prevent bridging on
    these tiny chips.

    Does anyone sell photo imageable dry film solder mask small quantities?

    --
    Glenn Ashmore

    I'm building a 45' cutter in strip/composite. Watch my progress (or lack
    there of) at: http://www.rutuonline.com
    Shameless Commercial Division: http://www.spade-anchor-us.com
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-