Connect with us

Disable AGC on Funai TV/VCR?

Discussion in 'Electronic Repair' started by John E., Jan 25, 2006.

  1. John E.

    John E. Guest

    Funai F9TRF1 TV/VCR is now TV-only. The VCR died )c:

    And as such, any displayed video signal input (DVD, VCR) suffers from the
    macrovision "copy protection" distortion.

    I want to be able to watch videos on this TV without these effects. Is it
    possible to disable this? (I seem to remember that one can fix the AGC at one
    level or create a manually-adjustable AGC.)

    All on-line instructions seem to describe building a circuit to strip off
    sync signals and re-generate others for the purpose of allowing duping of
    videos (not my goal).

    Thanks.
     


  2. Sure, you could go to manual AGC, and twidle the manual gain control
    all the time. Why not see if you can bypass the crapped out VCR and
    eliminate the real problem?


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
  3. b

    b Guest

    John E. ha escrito:
    it would perhaps be easier to just repair the inbuilt vcr. most likely
    just needs a belt changing. anyway let us know what the fault is and
    maybe someone will help.
    -b
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-