Connect with us

DIN Cable with Pioneer RT-707

Discussion in 'Audio' started by steve zelenak, Mar 29, 2018.

Scroll to continue with content
  1. steve zelenak

    steve zelenak

    Mar 29, 2018
    I'm using a DIN Cable for the first time instead of RCA connectors. Plugged the DIN into my Pioneer RT-707 then into the back of my Pioneer SX-950 receiver. When I tried to monitor the recording I was getting sound on sound using the monitor switch of the RT-707. How do I avoid this or is it not possible to monitor your recording while using a DIN cable? Also, where does the output of the tape deck now go? I had it set to Tape 2 while I was using RCA cables. Very confused.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day