Connect with us

digital sound from flat screen tv

Discussion in 'General Electronics Discussion' started by jfroage, Sep 21, 2012.

  1. jfroage

    jfroage

    6
    0
    Sep 20, 2011
    Hello,

    How can I convert the digital sound from a flat screen tv to analog? I have some amplified speakers and would like to use them with the flat screen tv. I haven't really looked, but I am sure there is a digital output on the back of the tv. They sell a $400 "sound bar" that hooks up to the tv. Can I use a D/A converter circuit and then use my Radio Shack amplified speakers? At the present time, I am using the Radio Shack speakers plugged in to the Dish Receiver and it does not work real well. The tv volume must be turned down to nothing or a serious reverb occurs. Thanks for any help.
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    9,399
    1,920
    Nov 17, 2011
    A simple D/ converter will not suffice as the digital audio from the TV is serially coded. You would need at least a suitable audio DAC plus a power supply plus a housing...
    What's the output of the TV? Coax, Optical, HDMI?
    Find the correct output and buy a cheap (~50 , be it Euros, Pound or Dollars) amplifier with the corresponding digital input.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-