Connect with us

Digital multimeter without Rotary switch.

Discussion in 'General Electronics Discussion' started by Prashant S Akerkar, Apr 1, 2018.

Thread Status:
Not open for further replies.
Scroll to continue with content
  1. Prashant S Akerkar

    Prashant S Akerkar

    Mar 30, 2018
    Is it feasible to design and construct a DMM with Rotary switch or Dial replaced
    functions with Push buttons ?.

    Example :

    110 V Ac - Push button
    230 V Ac - Push button
    300 V Ac - Push button

    Thanks & Regards,
    Prashant S Akerkar
  2. AnalogKid


    Jun 10, 2015
    Prashant S Akerkar likes this.
  3. Prashant S Akerkar

    Prashant S Akerkar

    Mar 30, 2018

    Is it a portable DMM product ?

    The Rotary switch is replaced completely
    with push buttons.

    Thanks & Regards,
    Prashant S Akerkar
  4. Harald Kapp

    Harald Kapp Moderator Moderator

    Nov 17, 2011
    Prashant, your questions, I've had a look at some of your recent ones, are way too general and lack the detail necessary to give really useful answers.
    The answers to many, if not most, of your questions you can find simply by looking what's on the market.

    A lot of what you're asking for is feasible.
    Is it meaningful? I have my doubts.
    Is it realizable at tolerable cost? And what would be your financial limit?
    hevans1944 and Ian like this.
  5. davenn

    davenn Moderator

    Sep 5, 2009
    pretty pointless and much more difficult to wire and use
    just think, if it was a better way to go, push buttons would already be the main way used

    time to close another thread
    hevans1944 likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day