Connect with us

digital ground and analog ground

Reply to Thread

Discussion in 'General Electronics Discussion' started by saurabh17g, Apr 7, 2010.

Scroll to continue with content
  1. Apr 7, 2010 #1
    saurabh17g

    saurabh17g

    72
    0
    Mar 8, 2010
    I am using AD9833 to generate sinewave. They have mentioned about digital supply(DVDD) and analog supply (VDD) to operate IC AD9833 . Both supplies operate at 5V.
    do i need to construct two powersupplies for the requirement?
     
  2. Apr 8, 2010 #2
    (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,411
    2,779
    Jan 21, 2010
    Possibly. Maybe not.

    What does the datasheet say?

    Does your usage correspond to the cases where they recommend separate power supplies?

    The spec sheet I looked at does not refer to separate power supplies, but does discuss the issues surrounding the digital and analogue grounds. Page 13 seems to outline the issues.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Analog and Digital Ground

  2. power ground and signal ground

  3. Ground and neutral wires

  4. Contaminated Ground

  5. Ground voltage??

  6. Positive Ground

  7. Ground Isolation

  8. Ground looping

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-