Maker Pro
Maker Pro

Digital clock project

kawadas

Feb 22, 2012
8
Joined
Feb 22, 2012
Messages
8
I am currently designing a digital alarm clock for the blind.

Does anyone know how some watches/ phones update the time automatically.
This could be a key feature on this project.

Any help would be much appreciated
 

GreenGiant

Feb 9, 2012
842
Joined
Feb 9, 2012
Messages
842
I am currently designing a digital alarm clock for the blind.

Does anyone know how some watches/ phones update the time automatically.
This could be a key feature on this project.

Any help would be much appreciated


What are you using for a controller?
Just a 555 and Logic circuit, or are you designing and programming using a microcontroller?

The only way that I have experience with is pulling it from either a cell phone signal, or pulling it from a computer/wireless network

There is a national (U.S.) radio signal that is connected to the Atomic Clock in Colorado that can be used to set it as well
 
Top