Connect with us


Discussion in 'General Electronics Discussion' started by wowbw7, Sep 20, 2012.

Scroll to continue with content
  1. wowbw7


    Sep 20, 2012
    we live in the country and our power supplier has numerous power 'blips' where the power to the house goes off for a split second..just long enough for all the digital clocks to display blinking"12:00". very annoying and time consuming to have to run around and reset the times. I was wondering, is there a way to wire a small capacitor in parallel to the individual clocks so as to supply power to the clocks, so they have continuing power during these 'blips? thanks
  2. donkey


    Feb 26, 2011
    alot of alarm clocks have a place underneath to install a 9volt battery. this stores settings such as time and alarms. you might want to look for one of these alarms.

    on the other side if you want to spend more money you can get a uninteruptable power supply, but thats overkill.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day