Maker Pro
Maker Pro

Differential Amplifier

Syed Waqar Ali

Jan 13, 2016
16
Joined
Jan 13, 2016
Messages
16
Hi guys!

I am working on INA149 differential Amplifier IC, for isolation and distortion free purposes, it gives us output signal equivalent to input signal (same magnitude), but free of noises . While using this i came across a problem while applying 6 Volts at input terminals i am getting above 15 volts output with clipping, instead of same amplitude signal. what can be the problem, either my id dead or any other reason ?
Thanking in anticipation
 
Top