Maker Pro
Maker Pro

Destiny 6100 and compass

D

Dave White

Jan 1, 1970
0
Has anyone here had any experince with this panel?
I am having problems direct connecting to the panel with compass via the
rs232 board?
the instructions are very straight forward but am still having problems
establishing a connection
Honeywell's tech support could not resolve my issues. I have even tried 2
different computers.
 
B

Barney

Jan 1, 1970
0
Dave White said:
Has anyone here had any experince with this panel?
I am having problems direct connecting to the panel with compass via the
rs232 board?
the instructions are very straight forward but am still having problems
establishing a connection
Honeywell's tech support could not resolve my issues. I have even tried 2
different computers.


I've done it with a direct connection. Laptop > hayes smartmodem 2400> Tip
& Ring on panel. Didn't have Rs232 board though so never tried that.
 
M

Marc -Ashton

Jan 1, 1970
0
Try reversing Pin 2 & 3 on one end of the connector.. Rx/Tx maybe be getting
a null modem conflict
 

Similar threads

D
Replies
1
Views
1K
Mark Leuck
M
J
Replies
5
Views
2K
Jim Rojas
J
D
Replies
8
Views
2K
Robert L Bass
R
V
Replies
8
Views
2K
Frank Olson
F
J
Replies
1
Views
2K
James Sweet
J
Top