Connect with us

Designing PCB with EasyEDA. Need a Glancing over, plz

Discussion in 'PCB Layout, Design and Manufacture' started by Korishan, Jan 8, 2018.

  1. Korishan

    Korishan

    10
    0
    Sep 2, 2015
    So, I'm using EasyEDA to build an SSOP20 -> DIP20 and SSOP30-> DIP30 adapter boards. The ones on eBay aren't quite designed right from what I can gather. The SSOP20 ones I think would work, but not sure. And there are no SSOP30->DIP30 boards.
    I want to make clear that I'm creating these PCB adapter boards so that I can plug the TI chips into a breadboard.

    So, my big question is, can someone look over these files and verify I have them properly to scale and put together correctly?

    Here's the Datasheet for the two chips:
    http://www.ti.com/lit/ds/symlink/bq76940.pdf
    http://www.ti.com/lit/ds/symlink/bq78350-r1.pdf

    And Gerber/SVG files:
    https://drive.google.com/drive/folders/1RfmBp-aw6GGOihCcTLQI4TF-DT1vP0XD?usp=sharing

    Thanks for any assistance. Trying to learn this stuff [​IMG]
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-