Connect with us

Designing a circuit with two switch and two appliance .

Discussion in 'General Electronics Discussion' started by Aakash_Murugan, Sep 28, 2014.

Scroll to continue with content
  1. Aakash_Murugan

    Aakash_Murugan

    1
    0
    Sep 28, 2014
    So i have two Switches. Close switch S1 gives me 230 Volt AC, whereas closing switch S2 gives me 5 Volt DC.. I have two appliances one works on 230 V AC(A1) and the other works on 5 V DC.. all the elements have a common ground or neutral. project.png
    so as we can see in the figure ... the truth table is given below..

    project1.png Is there any circuit that does not require costly components to achieve this?
     
  2. Gryd3

    Gryd3

    4,098
    875
    Jun 25, 2014
    What are the appliances, and what kind of current do you plan to draw?
    What kind of experience do you have with electrical work?

    To be honest, this may go nowhere. It does not seem like a viable, or safe project, but we'll see what happens.
     
    KrisBlueNZ likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-