Connect with us

Design push pull inverter using 28 nm using short channel analog design

Discussion in 'Electronics Homework Help' started by Alyaa, Apr 4, 2015.

Scroll to continue with content
  1. Alyaa

    Alyaa

    2
    0
    Apr 2, 2015
    Design push pull inverter using 28 nm using short channel analog design

    specs :

    voltage: 1 v

    voltage gain : 200

    3dB frequency : 2.5 MHZ



    the circuit model as attached image is (Analog push-pull amplifier) is the ONLY BASIC MODEL IN PAGE 13 of chapter 5 ( CMOS circuit design ) by philip allen


    ,,Then we must need to add (new modified equations )of short channel ID ( saturation and linear case ) , with Change the Vin in each case
    To find W/L Scaling

    these new equation ( which contains ( Ec L ) in this referance book 2015

    CMOS Digital Integrated Circuits (2015) ,S.M.Kang, Y.leblebici


    he need from me the report with hand calculation
     

    Attached Files:

  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,448
    2,809
    Jan 21, 2010
    How far have you got with this already?
     
  3. Alyaa

    Alyaa

    2
    0
    Apr 2, 2015
    How ,I don't understand.

    this is homework i 'm stuck
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-