Connect with us

Design LED driver according to IEC 62384

Discussion in 'LEDs and Optoelectronics' started by suyog, Jul 3, 2017.

  1. suyog

    suyog

    25
    0
    Apr 22, 2016
    I want to develop 35W 700mA Non dimmable LED driver for constant current operation of LED modules. I have to give input 180-264 VAC. Surge protection upto 3kV and Mains over voltage protection up to 320VAC. I also have to take care of efficiency which i have to maintain is greater than 85%.

    I am electronics beginner guy, I have no idea how i start design. I found some reference design of Texas Instruments Led Driver, St Microelectronics LED driver. I am searching components on digikey, mouser. because of lack of knowledge, not getting how to do it.

    I apologize for my bad English.
     
    Last edited by a moderator: Jul 3, 2017
  2. kellys_eye

    kellys_eye

    4,281
    1,144
    Jun 25, 2010
    Check out the manufacturers websites of companies that deliver integrated package devices for such applications as they often have 'design software' that does all the donkey work for you or they have detailed application notes on how to design for a specific end-purpose.

    Analog, Maxim, Linear Devices, etc all make such components.
     
    suyog likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-