Maker Pro
Maker Pro

Design a 1-bit fulladder using a decoder and 2 "or" gates?

D

Davy

Jan 1, 1970
0
Hi all,

There is another interview problem:

Design a 1-bit fulladder using a decoder and 2 "or" gates?

Any suggestions will be appreciated!
Best regards,
Davy
 
O

Ol' Duffer

Jan 1, 1970
0
Hi all,

There is another interview problem:

Design a 1-bit fulladder using a decoder and 2 "or" gates?

Any suggestions will be appreciated!

Sounds like mid-course time for Integrated Circuits 101.
This is where all that hard studying pays off.
 
M

Mac

Jan 1, 1970
0
Hi all,

There is another interview problem:

Design a 1-bit fulladder using a decoder and 2 "or" gates?

Any suggestions will be appreciated!

Well, I guess you have three inputs and two outputs. Maybe you should
start by drawing a truth table?
 
F

Fred Bartoli

Jan 1, 1970
0
Mac said:
Well, I guess you have three inputs and two outputs. Maybe you should
start by drawing a truth table?

Yep. Three inputs, two outputs.

The inputs:
- the job requirements,
- the interviewee,
- the interviewer,


The outputs:
- your new office,
- the street.

In your case, when we add the three input, you're immediatly carried to the
street output.
 
F

Fred Bartoli

Jan 1, 1970
0
"Fred Bartoli"
Yep. Three inputs, two outputs.

The inputs:
- the job requirements,
- the interviewee,
- the interviewer,


The outputs:
- your new office,
- the street.

In your case, when we add the three input, you're immediatly carried to the
street output.

Well, of course I didn't mean your case, but Davy's case :)
 
Top