Maker Pro
Maker Pro

dell monitor problem

C

CMOS

Jan 1, 1970
0
hi,
i own a dell m993 monitor. after around 6 months of use, the picture is
blurred at left top corner. now it is difficult to read small text in
that area. what might be the cause of this and how can it be corrected.
i continuously used its maximum resolution ( 1600x1200).

CMOS
 
J

JANA

Jan 1, 1970
0
The CRT mask may be magnetized on the one corner, there may be a dynamic
focus fault, or the CRT mask may be defective.

I six month old monitor should be carrying a balance of warranty if it was
bought new. Contact DELL for service.

--

JANA
_____


hi,
i own a dell m993 monitor. after around 6 months of use, the picture is
blurred at left top corner. now it is difficult to read small text in
that area. what might be the cause of this and how can it be corrected.
i continuously used its maximum resolution ( 1600x1200).

CMOS
 
Top