Defaults for 27" gaoo

[James O'Malley]

Does anyone know the defaults codes in the service menu for a
Panasonic Gaoo 27 " ct-27xf14c ?
I found some values at this site, but they are not right:

http://www.calanan.com/panasonic/

If so, can you post them or link to them. My picture seems to be a
bit off.

Thanks..

 

[Jerry G.]

There are no default values. Each set is slightly different. The use of
the proper calibration setup is essential to get the set working back to
factory specs.

If something went out of alignment over time, then the defective
components should be changed, and not the service set-ups. The
adjustments change because of parts drifting off value from age.
Troubleshooting and servicing the set is the proper answer.

--

Jerry G.
======

Does anyone know the defaults codes in the service menu for a
Panasonic Gaoo 27 " ct-27xf14c ?
I found some values at this site, but they are not right:

http://www.calanan.com/panasonic/

If so, can you post them or link to them. My picture seems to be a
bit off.

Thanks..