Connect with us

Dead SharpTV

Discussion in 'Electronic Repair' started by Vince, Apr 10, 2007.

Scroll to continue with content
  1. Vince

    Vince Guest

    I have this sharp mdlCK32S40, that won't start, I have all of my standby
    voltages, 5volts on the eeprom, 5volts on the power switch ,17 volts on the
    relay and 12volts to pin 18, is there a chance the eeprom is at fault?
    Any advice would help.
    Thanke you.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day