Connect with us

Dead Philips DCC

Discussion in 'Electronic Repair' started by Oddjob, Feb 7, 2004.

Scroll to continue with content
  1. Oddjob

    Oddjob Guest

    Hello all, I have three DCC machines two Marantz and one Philips all three
    have the same problem - no output both in analogue or digital.

    Does anybody have any experience with this problem or know how to cure it.

    Many thanks
     
  2. Andre

    Andre Guest

    Interesting. Did you check the supply to the output ICs?

    Sometimes the circuit protectors just fail for no reason with age,
    seen that on VCRs.

    (they look like two legged transistors most of the time)

    -A
     
  3. Oddjob

    Oddjob Guest

    Thanks for the tip, I will check it.
     
  4. Andre

    Andre Guest

    No probs :)

    -A
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-