Connect with us

Dead LCD inverter for 7 inch portable DVD player - help with replacement

Discussion in 'Electronic Repair' started by NuttingCDEF, Sep 18, 2007.

Scroll to continue with content
  1. NuttingCDEF

    NuttingCDEF Guest

    Can anyone tell me where I can find a replacement LCD inverter for a
    portable DVD player?

    The player is a Yamada / UMax PDiX-770

    The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
    manufactured by AU Optronics

    The (dead) inverter has no part number on it that I can trace on the
    web - the only markings that begin to look like a part number are "TDF
    0435"

    The input is 3-pin

    I'd probably just go ahead and try a generic LCD inverter except that
    I can't see one that is on a suitable sized board - the DVD player is
    cramped for space (unsurprisingly) - the existing inverter is about
    103mm long / 13mm wide / 4mm high - there might be room in the case
    for something marginally bigger, but not much!

    Any help gratefully received.

    NuttingCDEF
     
  2. Arfa Daily

    Arfa Daily Guest

    You could try looking at

    http://www.lcdpart.com/doc/ccfl.html

    Arfa
     
  3. JANA

    JANA Guest

    Get in touch with the manufacture, and enquire who is their part distributor
    for your area. You can then order parts from them.

    --

    JANA
    _____


    Can anyone tell me where I can find a replacement LCD inverter for a
    portable DVD player?

    The player is a Yamada / UMax PDiX-770

    The LCD panel is a 7 inch, single lamp model A070FW03 V1 - I believe
    manufactured by AU Optronics

    The (dead) inverter has no part number on it that I can trace on the
    web - the only markings that begin to look like a part number are "TDF
    0435"

    The input is 3-pin

    I'd probably just go ahead and try a generic LCD inverter except that
    I can't see one that is on a suitable sized board - the DVD player is
    cramped for space (unsurprisingly) - the existing inverter is about
    103mm long / 13mm wide / 4mm high - there might be room in the case
    for something marginally bigger, but not much!

    Any help gratefully received.

    NuttingCDEF
     
  4. JW

    JW Guest

    I posted this link about a month ago. These folks have your inverter:
    http://www.ergpower.com/pdf30/cross.pdf
     
  5. NuttingCDEF

    NuttingCDEF Guest

    Thanks for the link. The inverter for the A070FW03 panel is listed as
    D8md60J2. However, in the web store part of their site, the data
    sheet gives the dimensions of that inverter as 20.1mm x 90.9mm x 8mm.
    While electrically it is probably bang on, my problem is that it is
    significantly too wide / high to fit in the slot in the case. I'll
    contact them to see if they do anything else that might work, but any
    other suggestions anyone can make would be helpful.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-