Connect with us

DC to DC step up

Discussion in 'General Electronics Discussion' started by BlackMelon, Sep 4, 2012.

  1. BlackMelon

    BlackMelon

    187
    5
    Aug 7, 2012
    Hello,I've got a 12V battery but I want to step the voltage up to be 24V.. I don't need much current from the step up circuit(Even the circuit limits the output current at 3-4mA or more is OK)
    Please,show me the circuit
    Thank you very much :)
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,191
    2,693
    Jan 21, 2010
    Check this out. It's cheap and simple.

    I'm going to get back to it soon to improve the sensitivity to input voltage, but that may not matter for you.

    Beware that it's not current limited, but it would be fine for the small current you need.
     
  3. BlackMelon

    BlackMelon

    187
    5
    Aug 7, 2012
    Thank you for the circuit Steve, in fact,I'm really happy with the higher current limit because I might apply it to the other high current works :)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-