Connect with us

DC motors and speed control

Discussion in 'Sensors and Actuators' started by Sardis, Jun 21, 2015.

Scroll to continue with content
  1. Minder

    Minder

    2,948
    623
    Apr 24, 2015
    I looked up the standard MC-60 and it uses D4020L & S4020L which are 20 amp devices, so if you have it fused for 15amp, which is the rating for your 120vac outlet, you should be OK, in any case the parts are easily avail form Digikey and you could up the current rating if ever replacing.
    M.
     
  2. Sardis

    Sardis

    11
    0
    Jun 21, 2015
    Thanks so much for all the top grade help! Everything is working perfectly! Thank you for the information!
    P.S. Sorry I did not respond sooner. I have been tied up as of late.
    Michael
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-