Connect with us

dc motor speed control using dc-dc converter

Discussion in 'Electronic Design' started by [email protected], Aug 1, 2007.

Scroll to continue with content
  1. Guest

    hai..
    i'm currently in designing a dc-dc converter that will be use to
    control the speed of a dc motor..
    but my problem is..i do not know how to design the dc-dc
    converter...could anyone help me with this?
     
  2. Tim Wescott

    Tim Wescott Guest

    There's a good chance you want a four-quadrant amplifier, not just a
    DC-DC converter.

    At any rate, it's more than you'll find in newsgroup postings. I
    suggest you look for a good book on switching amplifier design --
    starting by asking for recommendations here isn't a bad thing.

    --

    Tim Wescott
    Wescott Design Services
    http://www.wescottdesign.com

    Do you need to implement control loops in software?
    "Applied Control Theory for Embedded Systems" gives you just what it says.
    See details at http://www.wescottdesign.com/actfes/actfes.html
     
  3. Jasen Betts

    Jasen Betts Guest

    pluse width modulation.

    Bye.
    Jasen
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-