Connect with us

D-Pak SUD40N10-25 reflow shift

Discussion in 'General Electronics Discussion' started by richardsawfilter, Nov 5, 2009.

Scroll to continue with content
  1. richardsawfilter

    richardsawfilter

    1
    0
    Nov 5, 2009
    Hello!

    I am using a D-Pak from Siliconix with part number SUD40N10-25. The unit were being subjected in reflow with 245°C peak temperature after mounting the D-Pak. The D-Pak shift or move after subjecting the unit at 225°C reflow peak temperature by our customer. We are thinking that the potential causes are the solderabilty and voids trapped under the FET drain tab but we are having a hard time to replicate it.

    Is there somebody out there experienced this problem and can explain how this thing happened.

    I have attached here the sample x-ray photo of the shifted FET.

    Thanks,
    -richardsawfilter
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-