Connect with us

Cypress component libraries for Protel 99 SE?

Discussion in 'CAD' started by Jesse O. Glidden, Oct 1, 2003.

  1. Does anyone know if Cypress has put out any libraries for thier components
    that are in Protel 99 SE format? Schematic and PCB. Sure would be helpful.
     
  2. helpful.

    It really doesn't take that long to build your own components. Try it.
     
  3. It really doesn't take that long to build your own components. Try it.
    Yeah, it took me 2.5 hours. I was hoping someone had already done this.
    You know, it's worth asking. If I had it and someone asked for it, I'd give
    it to them.

    This chip is 128 pins with lots of different I/O and clock pins and all
    that. Also, this was my first time building a component in Protel, so I had
    to do some reading. Also, I've only built the schematic version so far.
    Tomorrow I'll tackle the PCB part. More reading, more mouse clicking....
    ugh!

    Anyway, the chip is the EZ-USB FX2 model if anyone needs it.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-