Maker Pro
Maker Pro

Cutoff Load while charging the Lipo battery

Johnny101

Jul 13, 2014
43
Joined
Jul 13, 2014
Messages
43
I want to cutoff the battery from load, while charging it. Schematic of the designed circuit is attached. I have used a PNP transistor to do it. Positive terminal of the battery is connected to emitter, charger positive input is connected to base. Simulation is running good but I want to know would this circuit work in hardware? Is there any problem with the circuit?
 

Attachments

  • upload_2016-6-24_12-38-7.png
    upload_2016-6-24_12-38-7.png
    85.7 KB · Views: 77

Arouse1973

Adam
Dec 18, 2013
5,178
Joined
Dec 18, 2013
Messages
5,178
It should work, but a FET might be more efficient.
Adam
 
Top