Connect with us

Curve tracing

Discussion in 'General Electronics Discussion' started by shady, Aug 23, 2014.

  1. shady

    shady

    42
    5
    Aug 3, 2013
    I just bought myself a DCA75 from Peak Electronics and I just tested a 2N6111 everything looked ok until I did a PN junction test, the voltage dropped on reverse at 9v but on a new transistor there was no drop on reverse. I've attached some picture of the results i got from and old and new transistor with DCA75. If I didn't have the DCA75 what methods could I have used to get similar results?

    HFE-Vce.jpg Ic--Vce.jpg HFE--Ic.jpg
     
  2. shady

    shady

    42
    5
    Aug 3, 2013
    PN-Junction-I--V.jpg
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-