Connect with us

current mode control dc/dc converter

Discussion in 'Electronic Design' started by [email protected], Aug 6, 2007.

Scroll to continue with content
  1. Guest

    which is the good model for current mode control dc/dc converter
    including the high frequency effects? because there are so many models
    in the litarature!!!!!!
     
  2. MooseFET

    MooseFET Guest

    There is no "the good model". It varies with the topology of the
    converter you are making, the specifics of the design and the ability
    of the software (if any) you are using.

    You need to underatand the circuit before you can pick the model.
    Narrow the question and you may get opinions.
     
  3. linnix

    linnix Guest


    If you can model the components, then you can model the whole
    circuit. Getting a good model is easy, but getting the parts is
    not. I have a circuit model based on a very good transistor, but the
    sole manufacturer won't be interested in order of less than several
    thousands.
     
  4. PeteS

    PeteS Guest

    There are excellent application notes on current mode converters at all
    the usual suspects (and if you do not know who they are, you haven't
    looked hard enough).

    Cheers

    PeteS
     
  5. PeteS

    PeteS Guest

    Note I would have provided links if I didn't think you just wanted
    someone else to do your basic research for you.

    Cheers

    PeteS
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-