Connect with us

CTX MONITOR FAILS

Discussion in 'Electronic Repair' started by Leonardo, Jan 6, 2005.

Scroll to continue with content
  1. Leonardo

    Leonardo Guest

    I Have a CTX cps1760-df monitor, its turn on, power on led still's
    on!, but there is no image on the screen,the semiconductors are ok,
    does anyone help me, please???
     
  2. Guest

    Is the high-voltage OK (26-28KV) ?
    Are the CRT heater filimments glowing ?
    Is the G1 voltage OK (-20 to -60 V) ??
    Is the G2 screen voltage OK (350 - 600V) ??
    If above is OK, try connecting a 1K resistor
    for one of the video color cathode pins on
    the CRT socket to gound. The screen should
    turn on with that color.
    Hope ythis helps....
    John
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-