Maker Pro
Maker Pro

ctc195b rca projection t.v

S

sweet fellow123

Jan 1, 1970
0
hi, i am hoping someone can help me out here, i am repairing a ctc195b
chassis rca projection t.v, i replaced the flyback and all seemed ok,
3 hours later, i loose the sound, and cannot seem to program the
set,.i did the tuners over and alll grounds checked voltages on sound
ic seem to be ok,.as for the rest i am lost, and no diagram either, so
kind of hard to trace it out,.
 
J

Jamie

Jan 1, 1970
0
sweet said:
hi, i am hoping someone can help me out here, i am repairing a ctc195b
chassis rca projection t.v, i replaced the flyback and all seemed ok,
3 hours later, i loose the sound, and cannot seem to program the
set,.i did the tuners over and alll grounds checked voltages on sound
ic seem to be ok,.as for the rest i am lost, and no diagram either, so
kind of hard to trace it out,.
Check to make sure one of your buttons in the set hasn't got pushed
in and is being held in. Also, check the remote.

http://webpages.charter.net/jamie_5"
 
Top