CTC169BG Y4301 Ceramic Resonator P/N?

[D Sud]

Hi,

I am working on a CTC169BG that will not startup. I replaced all the normal
parts that fail and no luck.

There is 9vdc at pin 26 when POWER button is pressed but no clock at pin 25
of the TA8680 IC.

Anyone know the RCA Part# for Y4301 and where to get it.

My electronic service manual does not show this item?

Thanks,

Dave

 

[Jason D.]

Hi,

I am working on a CTC169BG that will not startup. I replaced all the normal
parts that fail and no luck.

There is 9vdc at pin 26 when POWER button is pressed but no clock at pin 25
of the TA8680 IC.

Anyone know the RCA Part# for Y4301 and where to get it.

My electronic service manual does not show this item?

Thanks,

Dave

Dave,

Here's this one, found this Y4301 via google:

http://www.freelists.org/archives/techassist/10-2003/msg01319.html

This is 503 Khz crystal in little yellow or blue plastic box, lot of
older TVs use this, if it says "503" on the box, take it. Remember to
check for fish smell when desoldering this. If so, do as this link
says. (phewwww!)

Cheers, Wizard

 

[Dave S]

Thanks Jason!! That was the right P/N 200210 and it fixed the problem. The
part was $4.05 from Tritronics.

Dave

 

[Dave S]

Thanks Jason!! That was the right P/N 200210 and it fixed the problem. The
part was $4.05 from Tritronics.

Dave

 

[Dave S]

Thanks Jason!! That was the right P/N 200210 and it fixed the problem. The
part was $4.05 from Tritronics.

Dave