Connect with us

CTC 203

Discussion in 'Electronic Repair' started by Michele Smith, Jan 27, 2005.

Scroll to continue with content
  1. One quick question before I dig into it. It powers up, but there is no
    power to the filaments. I've removed and cleaned the L14401 and pads, but no
    go. Any ideas? Thanks. Mark
  2. Did you check the HOT for being Shorted.
    Check also the regulator and associated components.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day