Maker Pro
Maker Pro

CTC-177 Fixed

K

Kevin Carney

Jan 1, 1970
0
Dead set caused by tuner ground shield problem. Thanks to Dave Kajuda, Sam
Goldwasser, the FAQ and this group for an easy repair. The EPROM was good
too !!!

--
change .combo to .com for correct email

***************************************************
"We ought always to know precisely why a given job
is done in a particular way, and why it is done at
all, and why it can't be done more efficiently,
if it must be done at all."-- T.J.Watson

***************************************************
 
S

Sofie

Jan 1, 1970
0
Kevin Carney:
You were lucky..... usually most folks continue to nurse the symptoms along
until the set won't power up or they have broken off the antenna
connector...... then the repair job is much more involved and much more
expensive...... and usually the EPROM will be shot too.
 
Top