Connect with us

CRO in PC

Discussion in 'Electronic Basics' started by Animesh Maurya, Sep 18, 2003.

Scroll to continue with content
  1. Iam looking for the possibility of any computer interfacing hardware
    through which we can use our PC as an oscilloscope.

    Iam not aware of any such hardware, is anybody having some idea about
    it.

    Thanks in advance
     
  2. Bob Masta

    Bob Masta Guest


    If you only need to monitor audio frequencies, consider using the
    sound card for a really high-resolution scope at very low cost.

    My Daqarta shareware can use an ISA-bus Sound Blaster
    running in real-mode DOS. (It can be launched from an icon in
    Win9x but not later versions). It has lost of features like
    spectrum analysis and signal averaging for noise rejection,
    which you won't find on low-end hardware scopes.

    Sound cards won't go down to DC, however, so if you need
    that you may want to look at my LPTX driver that allows you
    to use a handful of resistors and your printer port to create
    an 8-bit ADC . (8 bits is what most high-speed hardware add-ons
    use, so that's not a problem.)




    Bob Masta
    dqatechATdaqartaDOTcom

    D A Q A R T A
    Data AcQuisition And Real-Time Analysis
    Shareware from Interstellar Research
    www.daqarta.com
     
  3. Thanks for your suggestion.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-