Maker Pro
Maker Pro

Creating a Jacket with Built in Speakers (HELP)

MAXOFLIFE

Sep 8, 2013
1
Joined
Sep 8, 2013
Messages
1
Hello, this is my first post on this forum. I am a complete beginner with anything electronic. As the title says I am making a thin jacket I can wear that has two speakers built into the back. What I need help with, is finding two thin speakers that have a diameter of around 3 inches and then how to wire them. I plan on cutting open the jacket and placing the speakers on the inside of the fabric, but you will still see the front of the speakers.

As well, I also would need directions on how to make the speakers play through an audio jack so that I can plug in an music device I want to use.

Again, I am completely clueless and any help would be appreciated! If this is the wrong forum section I will delete this. :D
 
Top