Connect with us

cpu, and Hard Drives

Discussion in 'General Electronics Discussion' started by jaron, Sep 20, 2010.

Scroll to continue with content
  1. jaron

    jaron

    16
    0
    Sep 15, 2010
    I'm going to use a 10-Element Bar Graph Array on my pc to ram, cpu, and Hard Drives to monitor the use. but I need some help.
     
  2. Leighcusack

    Leighcusack

    15
    0
    Sep 9, 2010
    You need a better explanation too.
     
  3. jaron

    jaron

    16
    0
    Sep 15, 2010
    I like to have reed out on the led for the ram, cpu and, hdd.
     
  4. Ian

    Ian Administrator

    1,481
    431
    Aug 23, 2006
    Getting the CPU and RAM loads isn't something you can to by creating a simple circuit (as far as I'm aware), so you'd need to interface with the PC using a USB/Serial port and use some software to control the LED array using this.

    You can buy pre-made units that do this, but it's quite expensive.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-