Maker Pro
Maker Pro

CPL Load analysis

Anmol S

Aug 22, 2017
1
Joined
Aug 22, 2017
Messages
1
I wanted to understand the effect of CPL on a Power supply component like SMPS or LDO (May be to cascade the them and load CPL at end),for that I wanted to model CPL to analyse small signal stability ,can you give me suggestion regarding modelling .This will be very helpful.I have TINA TI SPICE

I want to do stability analysis of buck CPL load system and hence to determine their close loop performance.& stabilityt then I need to design controller for this
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Much as modern active load circuitry I suppose....

MOSFET load (power dissipation) device(s) with source current sense resistor generating feedback signal to comparator with set-point voltage (load) determination. You could chuck in temperature compensation if necessary.
 
Top