Could use some help with a tantalum cap

[TomB19]

I could use some help identifying a tantalum cap. I've read the docs, including KEMET's cap identification doc.

I believe the 105 means 100uF (10 with a multiplier of 5)

35 means 35v (this voltage makes sense on this circuit)

Any help with the 404? Does this mean "identifier not found"? lol!

 

[narkeleptk]

1 UF
35V 10%
404 is just a production code. Its not important.

 

[TomB19]

Brilliant! Thank you very much!

(saved!)

 

[narkeleptk]

Its all in the datasheet
https://www.mouser.com/datasheet/2/212/1/KEM_T2050_T491_AUTO-1093567.pdf

 

[TomB19]

I really appreciate the help.

I'm freshening up a gen 1 - HP 34401A (1994). It had a broken display and a dead a couple of other problems. Now that it's functioning, I want to freshen the caps on this beautiful meter that is ridiculous overkill for my needs.

 

[TomB19]

After recapping, the meter is in spec. What a lovely instrument.

Big thank you for the help. I really appreciate it!