Connect with us

Cordless phone battery pack

Discussion in 'Electronic Repair' started by Puddin' Man, Jun 30, 2011.

Scroll to continue with content
  1. Puddin' Man

    Puddin' Man Guest

    I've a RS 5.8ghz cordless phone with a dead battery pack:
    D-AA600BX3 DC 3.6V 600mAh

    Replacement battery-packs at DC 3.6V aren't too expensive, but I've not seen
    any at exactly 600mAh. Is this critical? Would, say, 800mAh work OK? Pardon
    my lack of knowledge.

    Thx,
    P

    "Law Without Equity Is No Law At All. It Is A Form Of Jungle Rule."
     
  2. Smitty Two

    Smitty Two Guest

    It will work and theoretically last 33% longer between charges.
     
  3. Charlie

    Charlie Guest

    Think of mAh as if it were the breaking strength of a rope in pounds.
    You want to lift a load that weighs 500 pounds.

    The instructions say that the rope should be rated at 600 pounds.

    So know let's rephrase your question.

    Is a rope that is rated at 800 pounds ok to use?

    As that gal from Alaska would say "You betcha"

    Charlie
     
  4. Puddin' Man

    Puddin' Man Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-