Connect with us

Converting from GenCAD to DXF?

Discussion in 'Electronic Components' started by Owen Ransen, Mar 16, 2008.

Scroll to continue with content
  1. Owen Ransen

    Owen Ransen Guest

    Converting from GenCAD to DXF?

    A customer has asked me to adapt one of my programs
    to convert from the GenCAD format to the DXF format
    but it seems strange to me that such a program
    does not yet exist.

    I can't find anything on google which does this.


    Easy to use graphics effects:
    http://www.ransen.com/
     
  2. Try GerbTool. It can read many formats, and definitely can output DXF.
     
  3. Owen Ransen

    Owen Ransen Guest

    Thanks for that!


    Easy to use graphics effects:
    http://www.ransen.com/
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-