Connect with us

Converting an old board

Discussion in 'Microcontrollers, Programming and IoT' started by Viktor, May 6, 2019.

Scroll to continue with content
  1. Viktor


    May 8, 2017
    Hi everyone,

    I've had an idea to replace an old unreplaceable board with some type of emulation software.

    The main components of the board is one Intel TN80C188EB13 microprocessor, and one AM29F010B flash chip.

    I have the software that's loaded onto the flash chip, and this device does have can communication.

    I'm not much of an electronics guy, but more of a software person. Is there any resources that I could be looking at? and which approach would be the most sensible one to take for this project.
  2. Nanren888


    Nov 8, 2015
    I presume that this board does something. The micro interfaces to other electronics?
    If you are to replace the board, I guess you must interface to the same electronics.
    Do you have schematics?
    Also, the "TN" in the name suggests an "industrial" spec part. Will it see a wide temperature range?
  3. Viktor


    May 8, 2017
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day