Connect with us

Converter RS232 to VGA

Discussion in 'Electronic Design' started by Johan Karremans, Nov 11, 2004.

Scroll to continue with content
  1. Is there anybody who know i can convert a RS232 signal to a VGA
    (monitor) signal? I can't find anything on the internet.
     
  2. Leon Heller

    Leon Heller Guest

    You could display RS-232 ASCII data on a VGA monitor with a PC running a
    suitable terminal emulator. Is that what you want to do?

    Leon
     
  3. The two signals have no relationship/relevance to convert. It is a bit
    like saying 'can I convert my kitchen mixer, into a 40ton Lorry'. The
    answer at that point is 'no way', which is why there is nothing on the net
    about it.
    However the ASCII text represented by the RS232 signal, could be displayed
    using either a PC (overkill), or a simple micro, with one of the chips
    designed to allow it output video. It is going to involve a lot more than
    a simple 'converter'. This way, the data carried by the RS232 signal, is
    converted into text to display (just as you can carry the mixer 'on' the
    lorry...).

    Best Wishes
     
  4. pcuser01

    pcuser01

    1
    0
    Dec 6, 2009
    yes, it must use some chips to allow RS-232 ASCII data output video.I think seldom will need this converter,if it has a big market,some factories will do it surely.

    ---------------------------------------------------------------------------------------------------------------------------
    Sintech RS232 RS485-RS422 converter
     
  5. USB Geek

    USB Geek

    2
    0
    Jan 22, 2010
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-