Connect with us

Convert iPhone six wire to usb 4 wire

Discussion in 'General Electronics Discussion' started by launchteam1, Dec 26, 2013.

Scroll to continue with content
  1. launchteam1

    launchteam1

    1
    0
    Dec 26, 2013
    I have a solar charger for an iPhone 3 that has been damaged. Where the existing loom has six wires (white, yelow, blue, red, black and green) that go into the 30 pin plug that then goes into the iPhone to charge. I'm wanting to convert this 6 wire loom to a female 4 wire USB port. I can't find anything that will show me a pinout except for all 30 wires. The connector is so small that I can't tell which pins these 6 wires go to. Can anyone help me with this conversion?
     

    Attached Files:

  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,448
    2,809
    Jan 21, 2010
    GND, +5V, D-, and D+ are the 4 connections which go to a USB connector.

    I suspect that the black and green wires are connected (test this) but I don't know what the EN line is for (enable?). Maybe you can leave it disconnected, maybe you need to do something with it??
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-