Connect with us

Convert HSpice Diode Model to PSpice?

Discussion in 'CAD' started by Jim Thompson, Mar 28, 2007.

Scroll to continue with content
  1. Jim Thompson

    Jim Thompson Guest

    Anyone know, or have pointers, on how to convert an HSpice Level=3
    diode model to PSpice?

    Thanks!

    ...Jim Thompson
     
  2. Run it in HSpice. Note the graphs and use the PSpice model maker!
     
  3. Jim Thompson

    Jim Thompson Guest

    My HSpice expired in the early '90's

    I still have the H9001 manual but, like all things HSpice, it's total
    shit.

    Will HSpice models run on your simulator, or on LTspice?

    ...Jim Thompson
     
  4. I would reckons you can just ignore the non spice3 parameters. Theres aint
    much in a diode model.
     
  5. Mike

    Mike Guest

    I have a more recent version of HSPICE and manuals, but they don't really
    explain Level 3. Another manual, for a different Spice, explains that Level
    3 models bottom and sidewall junction diodes are modeled separately,
    recombination is modeled at low bias levels, and high-level injection under
    moderately large signals is modeled.

    -- Mike --
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-