F
FSMüller
- Jan 1, 1970
- 0
Hi there,
for a laser range finder, I need to design a constant fraction
discriminator that turns the 0...2V pulses I get from the Avalanche
PhotoDiode (APD) Module into a TTL or CMOS compatible pulse that can be
fed into the Time to Digital Converter I bought from ACC. I´ve seen many
block schematics with the comparators, delay lines and so on, but my
electronic designs have never crossed the 10ns/100Mhz barrier as yet, so
I´m asking you for help, the more specific, the better. My dream would
be a ready made schematic or even an PCB design.
thananks for reading
Frank
for a laser range finder, I need to design a constant fraction
discriminator that turns the 0...2V pulses I get from the Avalanche
PhotoDiode (APD) Module into a TTL or CMOS compatible pulse that can be
fed into the Time to Digital Converter I bought from ACC. I´ve seen many
block schematics with the comparators, delay lines and so on, but my
electronic designs have never crossed the 10ns/100Mhz barrier as yet, so
I´m asking you for help, the more specific, the better. My dream would
be a ready made schematic or even an PCB design.
thananks for reading
Frank
