Maker Pro
Maker Pro

Connecting one speaker to two outputs?

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
What exactly are you trying to achieve?
  • Switch the speaker to either of the boards? Use a switch.
  • Or do you want to change the sound from the sound board using the voice changer and then output to the speaker? Connect the output of the sond board to the input of the voice changer, the output of the voice changer to the speaker.
  • Or do you want to have the outputs of both boards simultaneously on one speaker? The you will need a simple audio mixer and possibly an amplifier to power the speaker.
By the way: both your links point to the same product. I don't think that's intentionally?
 
Top