Connect with us

Connecting Help - 12vDC Pump to Receiver

Discussion in 'General Electronics Discussion' started by bobzzz, Sep 13, 2009.

Scroll to continue with content
  1. bobzzz

    bobzzz

    1
    0
    Sep 13, 2009
    hey all, new around here..looks like a good community :)


    Here is whats up:

    I want to connect my 12vDC water pump to a receiver that will be able to turn it on 3-16km away with a handheld transmitter.

    The wiring on the receiver is straight forward except for the connecting of the pump, I am unsure which is for which. The back it says, N/O, COM and N/C for each channel. The pump has 2 wires that are suppose to connect to the battery.

    Which wires do I connect to the receiver? What goes where?


    Here is a reference that may help, just to show you what i'm working with...
    electrodepot.com/7004ww.gif

    thanks!
     
  2. Pdenny

    Pdenny

    8
    0
    Sep 13, 2009
    1st- you will need to know the load that the pump draws at 12 v. 2nd you will need to know how much of a load the channel of the receiver can handle. I would be happy to help
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-