Connect with us

Connecting audio interface (balanced TRS jack line out) with synthesizer (TS jack line in)

Discussion in 'Audio' started by Ronx, Aug 13, 2019.

Thread Status:
Not open for further replies.
  1. Ronx

    Ronx

    10
    0
    Jul 30, 2019
    Hi!

    I want to send signal (my vocal) from my audio interface to my korg minilogue synthesizer. The output of my audio interface is balanced TRS jack line out while the synthesizer wants unbalanced TS jack on the input.

    What are my options here? I believe that connecting it with TRS cable would shorten the ring and could cause some damage to equipment or hum/buzzing.

    Will it be better to cut through the cable and leave ring floating, or buy REAMP box to transfer signal from balanced to unbalaned?
     
  2. davenn

    davenn Moderator

    13,249
    1,746
    Sep 5, 2009
    You already have a thread on going from balanced audio interface to a non-balanced device

    the suggestions you have already been given in that thread hold for this one too


    thread closed
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day

-