Connect with us

Connecting ARM Ethernet Port to WIFI Network

Discussion in 'Microcontrollers, Programming and IoT' started by ARM_PRO, Jan 4, 2014.

Scroll to continue with content
  1. ARM_PRO


    Dec 24, 2013
    Hi everybody,

    today, I'm going to share my new ARM project. In this project, I utilized ARM Ethernet port to communicate with my interface software over WIFI media.
    I developed interface software using QT platform. This means you can build this software for you Smart phones with android, ios, windows phone and LINUX platforms to monitor your hardware data.
    As you can see in video, you can control LEDs by clicking on corresponding element in software. Moreover, you can choose BLINK to set LEDs in blinky mode!
    Finally you can read KEYPAD status by clicking on READKEY button.

    You can download pc software and HEX file to program into your hardware.

    Enjoy it!

    Film of this project

    About this project and download HEX File

    If you want to get source code please contact me by [email protected]
    Last edited: Jan 4, 2014
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day